Single head sawing machine with Ø 550 mm front blade and electro-pneumatic cutting angle control.
Technical specifications
Tungsten carbide  550 mm saw blade
Oleopneumatic saw blade advance (adjustable blade exit speed – quick return)
Cutting angle from 20°Lh to 20°Rh on horizontal axis
Head tilting with impact dampened by mechanical stops
Integral guard kit around cutting area with automatic closing
2 pneumatic horizontal vices
Cutting lubrication by atomiser
Set up for the installation of chips and fumes collectors
Chips collected in dedicated drawer
Motor – tungsten carbide saw blade transmission by belt
Working pressure: 7 bar
Total dimensions 1300 x 1500 x 1600h mm, weight 770 Kg.
Saw blade motor, three phase 4 HP (2.94 Kw) – 2800 rpm. eurovoltage 230/400V– 50Hz; 275/480V – 60 Hz.
Saw blade holding spindle  32

Standard accesories
N Description
1  550 mm tungsten carbide saw blade
Spray mist blade lubrification system/Tool lubrification by atomizer
1 Cutting area guard kit
2 Horizontal vices
1 Integral guard system with automatic closing
Set up for forced evacuation of chips and fumes collectors
1 Compressed air gun with spiral hose (for machine cleaning)
Carton pallet packing with heat-shrink plastic bag

Set of clamping supports (profile type to be specified)
Micro-drop pure oil blade lubrication system
Vertical vice (nr.1)
Discharge roller table with length stop: manual, displayed, controlled
3000mm cutting length
4200mm cutting length
6000mm cutting length
Loading roller table with vertical rollers
3000mm cutting length
4200mm cutting length
Additional roller for roller tables
Additional charge for special voltage and cycles
(Standard motor 230/400V three-phase 50Hz)
Additional charge for plant version UL-CSA (The additional charge includes the plant with cables and special components)

Optionals: PACKING
Carton packing
Crate packing
Carton pallet packing with heat-shrink plastic bag:

A (mm) B (mm) C (mm) Kg
1650 1250 1800 790

Crate packing:

A (mm) B (mm) C (mm) Kg

The specifications and illustrations in this technical sheet are only guideline, FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.