016_matisseMATISSE
Copy router
Electro-pneumatic copy router with rotary-translation.
Technical Specifications
Spindle with dual rotation speed (6.000/11.800 rpm)
Vertical and horizontal vices with safety valves
Manual rotation and pneumatic clamping of profile being machined
Axis translation by indirect levers
Possibility of working at angles
The system allows the profile rotation without losing the machine positioning
Double copying template and double pneumatic tracer
Double copying template located on the superior side of the machine in an ergonomic position and easily visible to the operator
Possibility of machining with copying jigs or mechanical stops
Highly rigid head unit due to four cemented and round guide-ways with movement along recirculating ball bearings
Working lubrication by atomiser
Milling tool shank clamping size: from 5 to 10 mm (with pliers change)
Quick spindle stop for tool changing
Working pressure: 7 bar
Standard motor 230/400V three-phase 50Hz (special voltage three-phase 275/480V – 60 Hz – see optionals)
Air consumption per work cycle 2,5 Nl
Chip bin
Spindle with dual rotation speed (6.000/11.800 rpm)

Working Capacity

X = 330mm
Y = 125mm
Z = 125mm

X1 = 330 mm
Y1 = 125 mm
Z1 = 125 mm

Standard accessories
N Description
1 Milling bit: 10 mm. Ø cutting edge, 10 mm. Ø tang
1 Milling bit: 5 mm. Ø cutting edge, 8 mm. Ø tang
1 Collet for milling bit: 10 mm. Ø tang
1 Collet for milling bit: 8 mm. Ø tang
1 Ring nut for milling bit locking
2 Template
1 Vice jaw extension 1200 mm (RH or LH side)
6 Receding length stop
1 Compressed air gun with spiral hose (for machine cleaning)
Packing with heat-shrink plastic bag

Optionals
Description
Kit cooling system by emulsified oil and air
Additional receding stop
Additional magnetic receding stop
Additional charge for special voltage and cycle
(Standard motor 230/400V three-phase 50Hz)
Additional charge for plant version UL-CSA
(The additional charge includes motors with special voltage/measurements unit in inches)
Collets for milling bits (see collets catalogue)
Milling bit (see bits catalogue)

Optionals: PACKING
Description
Carton packing
Crate packing

Carton pallet packing with heat-shrink plastic bag:

A (mm) B (mm) C (mm) Kg
1070 850 1640 210

Crate packing:

A (mm) B (mm) C (mm) Kg
1070 850 1700 240

The specifications and illustrations in this technical sheet are only guideline, FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.