Electropneumatic Copy router

A (mm) B (mm) C (mm) Kg
800 730 1600 85

Technical Specifications
Spindle speed 12.000 rpm
Horizontal vices with safety valves
Tool lubrification by atomizer
Spindle slides cemented and round guide-ways with movement along recirculating ball bearings
Axis translation by indirect levers
Pneumatic tracer
Possibility of machining with copying jigs or mechanical stops
Milling tool shank clamping size: from 5 to 8 mm (with collet change)
Safety valves for vices
Double working pressure servo-controlled in low pressure
Quick spindle stop for tool changing
Three phase motor 0,73 kW(1 HP) -2.800 eurovoltage rpm 230/400V – 50Hz;275/480V – 60 Hz
Air filter
Working pressure: 7 bar
Air consumption per work cycle 2,8 Nl

Working Capacity

Standard accessories
N Description
1 Milling bit: 8 mm. Ø cutting edge, 8 mm. Ø tang
1 Collet for milling bit: 8 mm. Ø tang
1 Ring nut for milling bit locking
1 Milling bit: 5 mm. Ø cutting edge, 8 mm. Ø tang
1 Template
1 Compressed air gun with spiral hose (for machine cleaning)
Packing with heat-shrink plastic bag

Kit cooling system by emulsified oil and air
Additional complete tracer point (it allows to copy over 2 template;
it’ s to be inserted on the right side of the copy router
Vice jaw extension 805 mm (RH or LH side)
Roller table with vice jaw 1800 mm (right or left side)
Additional receding stop
Additional magnetic receding stop
Additional charge for special voltage and cycle
(Standard motor 230/400V three-phase 50Hz)
Additional charge for plant version UL-CSA
(The additional charge includes motors with special voltage/measurements unit in inches)
Additional charge for single-phase motor
(Standard motor 230 single phase 50HZ)
Collets for milling bits (see collets catalogue)
Milling bit (see bits catalogue)

Optionals: PACKING
Carton packing
Crate packing

Carton pallet packing with heat-shrink plastic bag:

A (mm) B (mm) C (mm) Kg
850 730 1700 100

Crate packing:

A (mm) B (mm) C (mm) Kg
900 730 1700 130

The specifications and illustrations in this technical sheet are only guideline, FomIndustrie therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons at any time and without prior notification.