BLITZ ALVA 550
BLITZ ALVA 550
Double-head sawing machine with motorised movement of the mobile head and pneumatic tilting of the ø 550 mm heads
Working cut A B C KG
m. 4 5700 2000 2010 1600
1660 vers. E
m. 5 6700 2000 2010 1900
1960 vers. E
m. 6,6 7340 2000 2010 2400
2460 vers. E
* Total dimensions with mobile head roller table A + 3000
(at max cutting length)
Technical characteristics
Head tilting from 22.5° external to 90° by pneumatic cylinders, with mechanical stops for intermediate angles
2 x tungsten carbide saw blades  550 mm with ø 32 mm hole
Hydraulic tungsten carbide saw blade feed (adjustable blade exit speed – quick return)
90°- 45°- 22.5° and intermediate angles obtained with stops located at the front of the machine and protection from chips
Integral safety kit around cutting zone
Horizontal (3) and vertical (2) pneumatic vices
Horizontal and vertical profile support surface in stainless steel
Mobile head roller table L=3000 mm
Atomised cutting lubrication kit
Direct motor – tungsten-carbide saw blade transmission
First head fixed, second head mobile with automatic positioning
Minimum cutting capacity between the two heads: 370 mm (can be reduced with dedicated software)
Maximum cutting capacity between the two heads: depending on version supplied (can be increased with dedicated software
Electrical switchboard separated from the pneumatic one and with easy inspection
Set up for forced extraction of chips and fumes
Working pressure 7 bar
Real time control of functions by numerical control
Membrane-type control keyboard protected from dust and chips
Large size swarf collection box to allow easy collection
Set up to take conveyor belt for collecting offcuts and a motorised chips collection conveyor belt
Kit for discharging chips in the collection box or swarf belt (OPTIONAL)
Blade motors, three-phase 3HP (2.2 Kw) – 2800 rpm. Euro voltage 230/400V– 50Hz; 275/480V – 60 Hz
Accessories supplied
N Description
2 Tungsten carbide sawblade Ø 550 mm
1 Integral safety kit around cutting zone
1 Mobile head roller table (3 mt.)
Vertical (2) and horizontal (3) vices
Microdrop tool lubrication
Set up for forced extraction of chips and fumes
ProCut Software licence (only for E version)
Description 550 A 550 C 550 E
Additional charge for special voltage and cycles
(Standard motor: 230/(380÷480)V three-phase 50/60 Hz and 110/230V single-phase 50/60Hz)
External transformer kit for machines with non standard Infeed area (for machines already manufactured)
Additional charge for UL-CSA version system
(The additional charge includes the plant with cables and special components/measurement unit in inches)
Additional charge for electrical cabinet cooling system
Profile clamp (specify type of profile when ordering) x 3
Supplementary horizontal vice kit
Roller table with vertical rollers, 3m, Fixed head
Roller table with vertical rollers, 4.2m, Fixed head
Retractable pneumatic intermediate profile support. (Q.ty 1)
State whether to be positioned as 1st or 2nd support
Retractable external profile support kit (Left) for machine with 4-5 m working cut (floor fixing outside machine)
Retractable external profile support (Left) for 6.6 m machine
Additional charge for profile height measuring device
Cutting lubrication by atomiser
Profile raising roller kit
Software licence for program for special length cuts (over and under size and super undersize) and 45° trim cut
Software licence for program for step-by-step cutting, with photocell safety barrier
Note: it is compulsory to by the additional horizontal vice N.D
Software licence for program for step-by-step cutting with two-handed command
Note: it is compulsory to by the additional horizontal vice
Description 550 A 550 C 550 E
Software licence for “Work” program (Including course) Note: relative archives necessary; see software list N.D N.D
Kit for list transmission via Ethernet for online connection to external devices and online assistance
Software licence for program for viewing cross-sections in DXF format
Software licence for program for viewing frame with the profile being machined highlighted
Activation of online assistance for one user
Label printer (including 1 reel of labels)
Reel of labels; min n. 10 pcs (58×35 mm)
Reel of labels; min n. 10 pcs (100×36 mm)
Optional accessories
Description 550 A 550 C 550 E
Chips conveyor belt 4000 mm
Chips conveyor belt 5000 mm
Chips conveyor belt 6600 mm
Rear chips conveyor belt 4000 mm
Rear chips conveyor belt 5000 mm
Rear chips conveyor belt 6600 mm
Kit for conveying chips in centre of machine
(For non CZ version, cannot be used with rear belt)
Angled conveyor belt
Optional accessories
Description 550 A 550 C 550 E
Chips conveyor belt 4000 mm
Chips conveyor belt 5000 mm
Chips conveyor belt 6600 mm
Rear chips conveyor belt 4000 mm
Rear chips conveyor belt 5000 mm
Rear chips conveyor belt 6600 mm
Kit for conveying chips in centre of machine
(For non CZ version, cannot be used with rear belt)
Angled conveyor belt