BLITZ ALVA 500
BLITZ ALVA 500
Double head sawing machine with ø 500 mm blade
Working cut A B C KG
mt. 4 5765 1600 1950 1550
mt. 5 6765 1600 1950 1830
mt. 6 7765 1600 1950 2140
Machine dimensions with mobile head fully to right A + 3100 mm
Technical characteristics
Head tilting from 22.5° outwards to 90° by pneumatic cylinders, with mechanical stops for intermediate angles
2 x 500 mm tungsten carbide saw blades
Blade centering hole ø 32mm with adapter ring
Hydro-pneumatic tungsten carbide saw blade feed (adjustable blade exit speed and quick return)
Direct motor – saw blade transmission
Blade motors: three-phase 3HP (2.2 Kw) – 2800 rpm. Euro voltage 230/400V– 50Hz; 275/480V – 60 Hz
28mm saw blade shaft
First head fixed, second head mobile with electronically controlled automatic positioning
Minimum cutting capacity between the two heads: 300 mm (can be reduced with dedicated software)
Maximum cutting capacity between the two heads: 4000, 5000 or 6000 mm depending on the version supplied (can be increased with dedicated software)
Blade tilting 90°/ 45°/ 22.5° and intermediate angles by means of front-mounted mechanical stops suitably protected from chips
Integral guard around cutting zone
Horizontal (3) and vertical (2) pneumatic vices
Sturdy mobile head roller table 3000 mm
Atomised cutting lubrication kit
Electrical switchboard separate from pneumatic one, both positioned vertically and easily accessible for inspection
Set up for forced extraction of chips and fumes
Large swarf collection box to allow easy collection and cleaning
Set up to take motorised conveyor belt for collecting offcuts and a rear motorised chips collection conveyor belt
Real time control of functions by PLC
Membrane-type control keyboard protected from dust and chips
Working pressure 7 bar
Compact Flash card reader and USB port
Technical characteristics
Head tilting from 22.5° outwards to 90° by pneumatic cylinders, with mechanical stops for intermediate angles
2 x 500 mm tungsten carbide saw blades
Blade centering hole ø 32mm with adapter ring
Hydro-pneumatic tungsten carbide saw blade feed (adjustable blade exit speed and quick return)
Direct motor – saw blade transmission
Blade motors: three-phase 3HP (2.2 Kw) – 2800 rpm. Euro voltage 230/400V– 50Hz; 275/480V – 60 Hz
28mm saw blade shaft
First head fixed, second head mobile with electronically controlled automatic positioning
Minimum cutting capacity between the two heads: 300 mm (can be reduced with dedicated software)
Maximum cutting capacity between the two heads: 4000, 5000 or 6000 mm depending on the version supplied (can be increased with dedicated software)
Blade tilting 90°/ 45°/ 22.5° and intermediate angles by means of front-mounted mechanical stops suitably protected from chips
Integral guard around cutting zone
Horizontal (3) and vertical (2) pneumatic vices
Sturdy mobile head roller table 3000 mm
Atomised cutting lubrication kit
Electrical switchboard separate from pneumatic one, both positioned vertically and easily accessible for inspection
Set up for forced extraction of chips and fumes
Large swarf collection box to allow easy collection and cleaning
Set up to take motorised conveyor belt for collecting offcuts and a rear motorised chips collection conveyor belt
Real time control of functions by PLC
Membrane-type control keyboard protected from dust and chips
Working pressure 7 bar
Compact Flash card reader and USB port
Accessories supplied
No. Description
2 Tungsten carbide sawblade Ø 500 mm
1 Integral guard around cutting zone
1 Roller table mobile head (3m)
1 First retractable pneumatic middle profile support
1 Profile height measuring device
5 N. 3 vertical vices and 2 horizontal vices
1 Atomised tool lubrication
1 Set up for installation of chips and fumes extractor system
1 ProCut software licence (only for E version)
1 Online remote assistance for first 12 months (only for versions C and E). PC required for version C, not supplied with the machine
1 USB port
Description 500 A 500 C 500 E
Additional charge for special voltage
(Standard power supply: 230/(380÷440)V three-phase 50/60 Hz and 110/230V single-phase 50/60Hz)
External transformer kit for machines with non standard power supply (for machines already manufactured)
(Standard power supply: 230/(380÷440)V trifase 50/60 Hz e 110/230V monofase 50/60Hz)
Additional charge for UL-CSA version system
(The additional charge includes the system with cables and special components/measurement unit in inches)
Additional charge for electrical cabinet cooling system
Profile clamp (specify type of profile when ordering) x 3
Supplementary horizontal vice kit
Fixed head roller table with vertical rollers 3000 mm
Fixed head roller table with vertical rollers 4200 mm
1st retractable pneumatic intermediate profile support
2nd retractable middle profile support (4000-5000 mm)
2nd retractable middle profile support (6000 mm)
Retractable external profile support kit (Left) for machine with 4000-5000 {186}mm working cut (floor fixing outside machine)
Retractable external profile support kit (Left) for machine with 6000 mm working cut
Profile height measuring device
Manual kit for under-sized cuts
Profile raising roller kit
First and second head angle readout kit
Kit for microdrop cutting lubrication with pure oil
Special adjustable pad for vertical vice
Description 500 A 500 C 500 E
Software licence for program for special length cuts (over and under size and super undersize) and 45° trim
cut
Software licence for program for converting data not generated by FOM programs
Software licence for program for step-by-step cutting, with photocell safety barrier n.d.
Software licence for program for step-by-step cutting with two-handed command (For non CZ version)
Software licence for “Work” program (Including course)
Note: Relative archives necessary; see software list n.d. n.d.
Software licence for multi-job machining program
Activation of online assistance for one user (on version C machine PC is not supplied as standard)
Kit for list transmission via Ethernet for online connection to external devices and online assistance
Software licence for program for viewing cross-sections in DXF format
Software licence for program for viewing frame with the profile being machined highlighted
Label printer
Reel of labels; minimum quantity 10 pc (size 58X35mm)
Perimeter fences and gate unit
Description 500 A 500 C 500 E
Swarf conveyor belt 4000 mm
Swarf conveyor belt 5000 mm
Swarf conveyor belt 6000 mm
Rear chips conveyor belt 4000 mm
Rear chips conveyor belt 5000 mm
Rear chips conveyor belt 6000 mm
Angled conveyor belt